Filter
Top Products
COURIER HIGH SPEED MODEMS
C-18 Alphabetical Command Summary
PERCENT COMMAND SET
%An Create and configure security accounts. See Appendix D.
%Bn Remotely configure the Courier's serial port rate. See Appendix
D.
%B0 110 bps %B6 9600 bps
%B1 300 bps %B7 19,200 bps
%B2 600 bps %B8 38,400 bps
%B3 1200 bps %B9 57,600 bps
%B4 2400 bps %B10 115,200 bps
%B5 4800 bps
%Cn Remote configuration control. See Appendix D.
%C0 Defer configuration. This is the default. Configuration
changes are deferred until the call is ended; they take
effect for ensuing connections. You do not need to enter
this command; it is the default unless you enter %C1 or
%C2.
%C1 Restore configuration. Use this command to cancel any
configuration changes made during remote access, and
restore the original configuration. However, commands
that have been written to NVRAM (with &W) will not be
restored to their previous settings. Additionally, if you
have forced immediate configuration changes (with
%C2), those changes cannot be reversed with %C1.
%C2 Execute configuration. Use this command to force
configuration changes to take effect immediately, during
the current connection. We recommend against forcing
immediate configuration changes unless absolutely
necessary, as this can result in an unreliable connection or
even a loss of connection.
%E=n Make security system edits. See Appendix D.
%E=1 Erase local access password.
%E=2 Erase autopass password.
%E=3 Erase passwords in accounts 0–9.