Filter
Top Products
COURIER HIGH SPEED MODEMS
Dial Security D-7
MAINTAIN SECURITY ACCOUNTS
Once the local access password is set and protected, the system
administrator is the only one who can access account
information. To modify or change account information, use the
%S= and %E= commands described next.
Account Access (%S)
Once Dial Security is enabled, you can access accounts by
entering the local access password using the %S= command,
which allows access to the accounts by disabling local security.
AT%S=(your local access password) <Enter>
NOTE: The modem echoes the local access password, which is
case sensitive. The system will accept an invalid password
entry, but will lock you out from the modem’s security
commands. For example, if the password is Bob, but you enter
BOB, an OK is displayed. However, if you try to type a security
command (for example, ATI10 <Enter> to view accounts), an
ACCESS DENIED message is displayed.
Account Status
Once access has been granted, you can view account
information by typing the I10 option of the Inquiry (I)
command:
ATI10 <Enter>
Remote users may only use this command during a remote
access session if local access security is disabled.