Filter
Top Products
120ViewSonic Pro9500
1) Turn on the projector, and make sure that the projector image is on screen.
2) Press the MENU button on the remote control or the ▲/▼ buttons on the
projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the “ADVANCED MENU”, and use the
► cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select the NETWORK, and use the ► cursor
button to enter the item.
5) Use the ▲/▼ cursor buttons to select the INFORMATION, and use the ►
cursor button to display the INFORMATION.
6) The Passcode appears in the INFORMATION window.
Method 2
• Take the method 2 when you project your computer image by the
“LiveViewer”, or when the LAN port is not selected as input source.
•
If no communication between the projector and computer in 5 minutes, the
Passcode will be changed.
NOTE
1. Connection to the network
1.5 Selecting the network connection method (continued)