ViewSonic VS13835 Projector User Manual


 
11ViewSonic Pro9500
Setting up
Arrangement (continued)
WARNING
(continued on next page)
Install the projector where you can access the power
outlet easily. If an abnormality should occur, unplug the projector urgently.
Otherwise it could cause a re or electric shock.
Do not subject the projector to unstable conditions. If the projector falls
or topples over, it could result in injury or damage to the projector and the
surrounding things. Using a damaged projector could result in a re and an
electric shock.
Do not place the projector in unstable places, such as an inclined surface,
places subject to vibration, on top of a wobbly table or cart, or a surface that is
smaller than the projector.
Do not put the projector on its side, front or rear position.
Do not attach nor place anything on the projector unless otherwise specied in
the manual.
Do not use any mounting accessories except the accessories specied by the
manufacturer. Read and keep the manuals of the accessories used.
For special installation such as ceiling mounting, be sure to consult your dealer
beforehand.
Do not install the projector near thermally conductive or ammable
things. Such things when heated by the projector could result in a re and burns.
Do not place the projector on a metal stand.
Do not place the projector where any oils, such as cooking or machine
oil, are used. Oil may harm the product, resulting in malfunction, or falling from
the mounted position.
Do not place the projector in a place where it may get wet. Getting the
projector wet or inserting liquid into the projector could cause a re and an
electric shock, and damage the projector.
Do not place the projector near water, such as in a bathroom, kitchen, or
poolside.
Do not place the projector outdoors or by the window.
Do not place anything containing liquid near the projector.