Filter
Top Products
121ViewSonic Pro9500
• When entering the Passcode, capital and small letters are not
distinguished.
• If you are using a Subnet mask other than Class A, B or C, you will have to
establish the connection manually.
If the manual setting screen is displayed, please follow item 1.5.1 (3).
NOTE
If you select [Enter PassCode] at item 1.5,
the “Please enter the PassCode” screen is
displayed. Please enter the Passcode divided
4-digit each in 3 boxes (total 12-digit).
Example PASSCODE: 1234 - 5678 - 9ABC
(2) Entering the Passcode
After entering the Passcode, click the [Connect] to start the connection to the
projector.
Proceed to item 1.8 Conrming the connection to your destination.
If you click the [Back], the screen is back to item 1.5 Selecting the network
connection method.
[Troubleshooting]
n Incorrect PassCode.
The incorrect Passcode was input.
Click the [Back] to return to the “Please
enter the PassCode” screen.
Check the PassCode on the projector
screen and enter the code again.
1. Connection to the network
1.5 Selecting the network connection method (continued)