Filter
Top Products
GLOSSARY
G-3
Glossary
E-Mail Printing Software application that automatically
retrieves your e-mail messages from your POP3 server and
prints them on your MFC.
extension phone A telephone on the fax number that is
plugged into a separate wall jack.
external phone A TAD (telephone answering device) or
telephone that is plugged into the EXT jack of your MFC.
F/T Ring Time The length of time the MFC rings (when the
answer mode setting is FAX/TEL) to notify you to pick up a
voice call that it answered.
FAX/TEL mode You can receive faxes and telephone calls. Do
not use FAX/TEL if you are using an external answering
machine.
Fax Forwarding Sends a fax received in memory to another
preprogrammed fax number.
Fax Storage The MFC 7050C can save up to 85 fax pages in
memory. You can print stored faxes later, or retrieve them from
another location using Fax Forwarding, Paging, or Remote
Retrieval functions.
fax tones The signals sent by sending and receiving fax
machines while communicating information.
Fine mode Resolution is 196 x 203 dpi. It is used for small
print and graphs.
Function mode The programming mode for changing the
settings of your MFC.
gray scale The shades of gray available for copying and faxing
photographs.
group number A combination of One Touch and/or Speed Dial
numbers that are stored on a One Touch key for Broadcasting.
ICM (incoming message) A recorded voice message received
into the MFC’s digital Message Center.
Ink Management button Cleans the print head and/or resets
the ink dot counter after replacing an ink cartridge.
interval The preprogrammed time period between automatically
printed Activity Reports. You can print Activity Reports on
demand without interrupting this cycle.
LCD (liquid crystal display) The display screen on the MFC that
shows interactive messages during On-Screen Programming
and defaults to the date and time when the machine is idle.
manual fax Sending a fax by pressing
Hook
—OR—lifting the
handset, so you can hear the receiving fax machine answer
before you press
Start
to begin transmission.