Filter
Top Products
Watlow EZ-ZONE
®
PM Integrated Controller • 49 • Chapter 8 Factory Page
To go to the Factory Page from the Home Page,
press and hold both the Advance ‰ and Infinity ˆ
keys for six seconds.
• Press the Advance Key ‰ to move through the
parameter prompts.
• Press the Up ¿ or Down ¯ keys to change the
parameter value.
• Press the Infinity Key ˆ to return to the Home
Page.
Note: Avoid continuous writes within loops. Excessive writes to
EEPROM will cause premature EEPROM failure. The EEPROM
is rated for 1,000,000 writes.
Chapter 8: Factory Page
Home
Page
Factory Page Parameters
[~~p~]ˆ
[~~Sp]‰ˆ
[CUST]ˆ
[FCty]‰
[```I]ˆ
[CUST]‰
[`PAr]‰
[`iid]‰
Hold both keys
for 6 seconds.
Custom
Menu
<
>
Custom 1
Submenu
Parameter Instance
ˆ
Custom 2
to 20
Submenus
Same as above.
ˆ
[`LoC]ˆ
[FCty]‰
[LoC;o]‰[LoC;P]‰[rLoC]‰
[SLoC]‰
Lockout
Menu
<
>
Lock
Operations
Page
Lock
Profi ling
Page
Read Lock Set Lock
ˆ
[diAg]ˆ
[FCty]‰
[``Pn]‰[`rEu]‰[S;bLd]‰[``Sn]‰[dAtE]‰[USr;r]‰[USr;S]‰[iP;A1] … [iP;A4]‰
[C;LEd]‰
Diagnostic
Menu
<
>
Part Number Software
Revision
Software
Build
Serial
Number
Date of
Manufacture
User Restore
Set
User Save
Set
IP Actual
Address
Part 1
IP Actual
Address
Part 4
Communica-
tions Indica-
tor Light
ˆ
[`CAL]ˆ
[FCty]‰
[~~~I]ˆ
[`CAl]‰
[`Mu]‰[ELi;o]‰[ELi;S]‰[ELo;o]‰
[ELo;S]‰
Calibration
Menu
<
>
Calibration 1
Submenu
<
>
Electrical
Measure-
ment
Electrical
Input Offset
Electrical
Input Slope
Electrical
Output
Offset
Electrical
Output Slope
ˆ
Calibration 2
Submenu
Same as above.
Navigating the Factory Page
Note:
Some of these menus and parameters may
not appear, depending on the controller's
options. See model number information in
the Appendix for more information.
If there is only one instance of a menu, no
submenus will appear.
8