Filter
Top Products
030-300500 Rev. A 146 October 2006
User Guide
VersaLink™ Gateway (Model 327W)
15.5.3 RIP Table
The following settings will be displayed if you select RIP Table from the Status menu.
NOTE: RIP must be enabled for this table to be populated.
RIP Network Routing Table Indicates Network routes received via RIP.
RIP Host Routing Table The Host routes received via RIP.
Destination The destination IP address of the route
Netmask The IP mask of the route
Gateway The gateway of the route
Metric The RIP metric (0-15). A lower value is better.