Filter
Top Products
030-300500 Rev. A 41 October 2006
User Guide
VersaLink™ Gateway (Model 327W)
If you clicked OK in the preceding pop-up screen, the following pop-up screen will appear. VersaLink must be reset
to allow the new configuration to take effect. Click on OK.
If you clicked OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and the
new configuration will take effect.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session). Next, Select Single Static IP from the
Configuration menu to confirm that Single Static IP is enabled, as shown in the following screen.