Filter
Top Products
030-300500 Rev. A 90 October 2006
User Guide
VersaLink™ Gateway (Model 327W)
12.6.2.2 Disabling DSLATM PORT – Enabling ETHERNET PORT 1
To configure the VersaLink so that it uses the WAN Ethernet Port, select ETHERNET PORT 1 from the WAN
PORT drop-down arrow. By selecting ETHERNET PORT 1, you will disable the VersaLink’s DSL transceiver.
This will disable the DSL Port and allow the WAN interface to use the WAN Ethernet Port.
NOTE: If ETHERNET PORT 1 is configured, the VersaLink’s menu options may or may not be displayed. The
sections explained throughout this document will indicate when a menu item is unavailable. The UPLINK feature is
optional, and if UPLINK is not enabled in the .ini file, the Gateway will use DSL and Wireless only.
NOTE: If you experience any problems, please reset VersaLink via the external hardware reset button or via the
procedure defined under the Maintenance menu in section 14.1. (Factory defaults become current configuration.)
If you select ETHERNET PORT 1 from the WAN Port drop-down arrow, the following screen will be displayed.
Click OK.