Filter
Top Products
030-300500 Rev. A 88 October 2006
User Guide
VersaLink™ Gateway (Model 327W)
12.6.2.1 Enabling DSLATM PORT – Disabling ETHERNET PORT 1
(If Applicable)
NOTE: When using the optional uplink port (E1), Ethernet LAN connection is limited to E2, E3, and E4.
The UPLINK feature is optional. If UPLINK is not enabled, VersaLink will use DSL and wireless only.
To configure the VersaLink so that it uses the DSL port, select DSLATM PORT from the WAN PORT drop-down
arrow. By selecting DSLATM PORT, you will enable the VersaLink’s DSL transceiver. This will disable the WAN
Ethernet port and allow the WAN interface to use the DSL port.
NOTE: All of VersaLink’s menu options are displayed if VersaLink is configured for DSLATM PORT.
If you select DSLATM PORT from the WAN Port drop-down arrow, the following screen will be displayed. Click
OK.