Filter
Top Products
5.3. PLS Command/Menu Conventions
When invoking PLS commands or selecting items from
configuration menus, note the following:
·
All PLS commands can be invoked at the PLS> command
prompt, or from the General Parameters Menu, Circuit
Parameters Menus, Monitor Parameters Menu, or Network
Parameters Menu.
·
PLS commands are not case sensitive.
·
All PLS commands are invoked by pressing [Enter].
·
To select an item from a PLS menu, key in the number for
the item and press [Enter]. To exit from a menu, press
[Esc] at any time. Parameters defined up to that point will
be saved.
·
To display the Help Screen, type /H [Enter].
·
The ",y" option can temporarily suppress the "Sure"
(confirmation) prompt. The ",y" option is entered at the
end of the command line, immediately following the
command or argument. For example, to reset the network
port without displaying the "Sure" prompt, type /T,y and
then press [Enter].
·
If you are configuring the PLS via network, network
communication parameters will not be changed until your
telnet connection to the PLS has been terminated
5-4
PLS-345 - Physical Layer Switch; User's Guide