Filter
Top Products
Note: Although new network port parameters can
be specified via a network connection, newly
selected parameters will not be applied until your
telnet connection to the PLS has been terminated.
1. IP Address: Defines the IP Address for the PLS unit.
Type 1, press [Enter] and follow the instructions in the
submenu. (Default = 192.168.168.168.)
2. Subnet Mask: Defines the Subnet Mask for the PLS unit.
Type 2, press [Enter], and follow the instructions in the
submenu. (Default = 255.255.255.0.)
3. Gateway Address: Defines the Gateway Address for the
PLS unit. Type 3, press [Enter] and follow the
instructions in the submenu. (Default = undefined.)
4. IP Security: Sets up the IP Security feature as described
in Section 5.6.1. (Default = undefined.)
5. MAC Address: Displays the unit's MAC address. Note
that this item only displays the current address, and cannot
be used to redefine the MAC address.
5-10
PLS-345 - Physical Layer Switch; User's Guide
NETWORK PARAMETERS:
1. IP Address: 65.106.93.114
2. Subnet Mask: 255.255.255.0
3. Gateway Address: 65.106.93.97
4. IP Security
MAC Address: 52-54-40-22-48-7a
Enter Selection or <ESC> to Exit ...
Figure 5.4: The Network Parameters Menu