Filter
Top Products
For the purpose of this overview, it is only recommended to review the information on each
menu in order to familiarize yourself with the unit; it is not necessary to actually enter
parameters at the configuration menus at this time.
1. View/Set General Parameters: From the command prompt, type /G and press [Enter].
The General Parameters Menu will be displayed. This menu is used to set Console Port
communication parameters, define the System Password, Console Port Password, and
select other general parameters as described in Section 5.2. Press [Esc] to return to the
Main Menu.
2. View/Set Modem Parameters: Type /M and press [Enter] to display the Modem
Parameters menu. This menu is used to select communication parameters for the SRM's
internal modem as described in Section 5.3. Press [Esc] to return to the
Main Menu.
3. Utilities Menu: Type /U and press [Enter] to display the Utilities Menu. This menu is
used to access SRM-100 command features, such as the Pass-Through Mode (see
Section 7.6.8), the Download Parameters Function (see Section 8.1), and others. Press
[Esc] to return to the Main Menu. For more information on the Utilities Menu, please
refer to Section 7.6.
4. Other Menus: At this point, commands such as "View Password Directory" and "View
Audit Log" will not display much information. This is due to the fact that the Password
Directory has not been defined yet, and the Audit Log has not had the opportunity to
record connection activity. If you wish to display these menus, key in the appropriate
command and then press [Enter]. To exit a menu, press [Esc] to return to the
Main Menu.
3-3
SRM-100 - Secure Rack Modem, User's Guide Getting Started
Secure Rack Modem Version: 1.13 Site: (undefined)
COMMANDS
/H Display Help Screen /C View Audit Log
/G View/Set General Parameters /U Utilities
/M View/Set Modem Parameters /X Exit/Disconnect
/E Edit Password Directory
/D View Password Directory
Modem Type: MT2834ZPX
Reset String: ATZ
Init String: AT&C1&D2E0Q1V1M1S0=1&E1&E15S13=0
Hang-Up String: (undefined)
MODEM PORT SETTINGS
Baud Rate: 9600 Result Codes: Verbose
Flow Control: RTS/CTS Speaker: On
Local Echo: Off Error Control: On
Rings to Answer: 1 Compression: On
Quiet Mode: On Ignore DTR: Off
Figure 3.1: The SRM-100 Help Screen