Western Telematic SRM-100 Network Card User Manual


 
7.6. The Utilities Menu
The Utilities Menu allows access to a series of command functions that are related to general
operation and maintenance of the SRM unit. To display the Utilities menu, access the SRM
Command Mode as described in Section 5.1, then type /U and press [Enter]. The menu shown
in Figure 7.2 will appear. The various functions of the Utilities menu are discussed in the
sections that follow.
7.6.1. Zero All Activity Counters
This command is used to reset the counters that track connection activity for each password.
To zero all activity counters, access the Utilities Menu, then type 1, press [Enter], and follow
the instructions in the submenu.
To view the password activity counters, access the SRM Command Mode as described in
Section 5.1, type /D and press [Enter] to display the Password Directory. For more
information, please refer to Sections 6.4 and 6.5.
7.6.2. Delete Audit Log
This command is used to clear all records from the Audit Log. To erase all Audit Log entries,
access the Utilities menu, type 2 and then
press [Enter].
Note: Once the Audit Log has been cleared, the deleted connection activity records
cannot be recovered.
7.6.3. Delete Entire Password Directory
This function is used to completely clear the entire password directory. To clear all entries
from the SRM Password Directory, first access the Utilities Menu as described above. When
the Utilities Menu appears, type 3, press [Enter], and follow the instructions in the submenu.
Note: When this function is performed, the entire SRM password directory will be
cleared. The Password Directory cannot be restored unless parameters have been
previously saved to an ASCII file as described in Section 8.
7-7
SRM-100 - Secure Rack Modem, User's Guide Operation
UTILITIES
1. Zero All Activity Counters
2. Delete Audit Log
3. Delete Entire Password Directory
4. Default Parameters
5. Send Test Message (ESC to Stop)
6. Upload Parameters
7. Download Parameters
8. Pass-Through (Console - Modem)
Enter Selection,
Press <Esc> to Abort ...
Figure 7.2: The Utilities Menu