Filter
Top Products
2. Password: The User Password that is currently defined for this name. Note that the
password is case sensitive.
3. Dial Back Number: The Dial Back Number currently defined for this name. Note that if
the Dial Back Number has not been defined, this field will read "undefined".
4. Activity: The number of times this password has been used since the last time the
activity counter was reset. The procedure for resetting the activity counter is discussed in
Section 6.5.
6.5. Zero Activity Counters
In order to track password activity, the Password Directory screen lists the number of access
attempts for each user password/name. From time to time, you may wish to re-zero these
counters to obtain a more accurate picture of password activity. To Zero the Activity Counters,
proceed as follows:
1. Access the SRM-100 Command Mode as described in Section 5.1.
2. When the "SRM>" command prompt appears, type /U and press [Enter]. The Utilities
Menu will appear as shown in Figure 7.2.
3. From the Utilities menu, type 1, then press [Enter] and follow the instructions in the
submenu.
6.6. Save Parameters
After the Password Directory has been defined, it is recommended to save SRM configuration
parameters and the Password Directory to an ASCII file as described in Section 8. This allows
quick recovery in the event that the unit is reset to default parameters, or configuration is
accidentally deleted or altered.
6-6
SRM-100 - Secure Rack Modem, User's Guide The Password Directory