Filter
Top Products
5.3. The Modem Parameters Menu
The Modem Parameters Menu selects communication parameters for both the SRM’s internal
modem and the SRM's serial Modem Port. To display the Modem Parameters Menu, access the
Command Mode as described in Section 5.1, then type /M and press [Enter].
To change the setting for any item in this menu, key in the number for the desired item, press
[Enter] and then follow the instructions in the submenu. The Modem Parameters Menu
includes the following items:
1. Baud Rate: The operating baud rate for the SRM's modem and serial Modem Port. If
the unit is reinitialized, the baud rate will return to the default value selected by SetUp
Switches One and Two. (Default Determined by SetUp Switches 1 & 2;
Factory Setting = 9600).
Note: Automatic baud rate sensing is disabled. This allows the SRM to function
with devices that do not automatically negotiate the baud rate.
2. Bits / Parity: The operating Data Bits and Parity Bits for the SRM's modem and serial
Modem Port. If the unit is initialized to default settings, the Bits and Parity will return to
the default setting currently selected by SetUp Switch 4. (Default is Determined by
SetUp Switch 4; Factory Setting = 8-None).
3. Stop Bits: The setting for the SRM-100's modem. (Default = 1).
4. Flow Control: This item selects the operating flow control format for the SRM’s internal
modem. Note that if the SRM is initialized to defaults, the modem will return to the
default flow control format selected by SetUp Switch 3. (Default Determined by SetUp
Switch 3; Factory Setting = None).
5-6
SRM-100 - Secure Rack Modem, User's Guide Set-Up and Configuration
MODEM PARAMETERS
1. Baud Rate: 9600
2. Bits/Parity: 8-None
3. Stop Bits: 1
4. Flow Control: None
5. Local Echo: Off
6. Rings to Answer: 1
7. Quiet Mode: On
8. Result Codes: Verbose
9. Speaker: On
10. Error Control: On
11. Compression: On
12. Reset String: ATZ
13. Custom Init String: (undefined)
14. Hang-Up String: (undefined)
15. Ignore DTR: On
Enter Selection,
Press <Esc> to abort ...
Figure 5.3: The Modem Parameters Menu