Filter
Top Products
Xerox
®
DocuMate
®
4700
User’s Guide
129
Scanning
Some features described herein may not be available for the current scanner. Please disregard any information
about features that you do not see in the interface for your scanner.
Note: Visioneer Acuity must be installed for the image processing options, described in this document, to be
available in the interface for your scanner. Only features that are appropriate for your scanner will be enabled after
Visioneer Acuity is installed. Visioneer Acuity is automatically installed when you install the scanner driver from the
installation disc. If you downloaded the scanner driver from our website, make sure you also download and install
Visioneer Acuity.
1. Load the document(s) in the scanner.
2. Adjust the settings in the interface for the item you are scanning.
3. Click on the Scan button.
4. When scanning is complete, click Done to close the interface.
5. The scanned images are now in the scanning application.
Note: If you see this locked version of the scanner’s interface you will be able to select a predefined scanning profile
from the Presets list, and then click the Scan button to start scanning.
You can also click on the Preview button to open the preview dialogue for you to scan a preview image and set
custom scan regions.
You can lock or unlock the scanner’s interface from the driver configuration options for your scanner. The instructions
for changing this setting are in the Driver Settings section of this guide. If you are unable to change this setting the
option may have been set by your system administrator. Please contact your system administrator for more
information.