Filter
Top Products
Xerox
®
DocuMate
®
4700
User’s Guide
148
Rotate Image
Select an option in this list to have the final image rotated when scanning is complete.
Advanced Panel Options
The options in this panel may also appear in the Main panel, but with additional settings for you to fine-tune the
feature you've selected. Select the Advanced source configuration mode to show this panel.
Skip Blank Originals
Select this option to have the scanner detect if a blank page has been fed through the scanner, and remove it from
the final file.
• Blank threshold—you can adjust the sensitivity level of the blank image detection. You can use the Threshold
slider to fine tune the sensitivity of the blank image detection. The results will depend on the scan settings and
the types of documents being scanned. In general leave the threshold level at the default setting if you are
scanning good-quality documents printed on standard 20lb printer paper. Try lowering the sensitivity level if
your documents contain light colored text or drawings so those pages are not detected as blank. Raise the
sensitivity level if you are scanning double-sided light-weight paper where images from the opposite side of
the page may appear in the image of the blank side.
Clean Up Edges
Select this option to remove any thin lines from around the edges of the final scan. These lines may appear in the
edges when the item being scanned is not the exact size of the dimensions indicated in the page size fields. This
option will fill the margins of the image with the detected edge color. When you select this option, the Width input
field will automatically enable for you to input the size of the area you want to have filled with the background color.
This option is only available if the scanner supports this feature.
You can specify a fill size between approximately 0.04 to 0.39 inches (1 to 10 mm).