1 Before Using the Machine
8 Xerox 6204 Wide Format Solution
Before Using the Machine
1
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety
guidelines at all times.
Do These:
z
Always connect equipment to a correctly grounded power outlet. If in doubt, have
the outlet checked by a qualified electrician.
- This equipment must be connected to a protective grounded circuit, and the
equipment is supplied with a plug that has a protective grounding pin. This plug
will only fit into a grounded electrical outlet. This is a safety feature. To avoid risk
of electric shock, contact your electrician to replace the electrical outlet if you are
unable to insert the plug into it. Never use a plug that lacks a grounded connection
terminal to connect the product to an electrical outlet.
z
Always follow all warnings and instructions that are marked on or supplied with the
equipment.
z
Always exercise care when moving or relocating equipment. Please contact your
local Xerox Service Department, or your local support organization to arrange
relocation of the product to a location outside of your building.
z
Always locate the equipment in an area that has adequate ventilation, and has room
for servicing. See the Install Guide for minimum dimensions.
z
Always use materials and supplies specifically designed for your Xerox equipment.
The use of unsuitable materials may result in poor performance.
z
Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
z
Never use a plug that lacks a grounded connection terminal to connect the product
to an electrical outlet.
z
Never attempt any maintenance function that is not specifically described in this
documentation.
z
This equipment should not be placed in a built-in installation unless proper
ventilation is provided. Please contact your Authorized Local Dealer for further
information.
z
Never remove covers or guards that are fastened with screws. There are no
operator serviceable areas within these covers.
z
Never locate the equipment near a radiator or any other heat source.
z
Never push objects of any kind into the ventilation openings.
z
Never override or "cheat" any of the electrical or mechanical interlock devices.
z
Never operate the equipment if you notice unusual noises or odors. Disconnect the
power cord from the electrical outlet and contact your local Xerox Service
Representative or Service Provider immediately.