Filter
Top Products
3 Copy
66 Xerox 6204 Wide Format Solution
Copy
3
Copy Density
The Copy Density option allows you to adjust the lightness or darkness of the copies
relative to the original. The factory default setting is [Normal].
Procedure
Adjust the copy density setting using the [ ] and
[ ] buttons.
You can select from nine levels between [Light]
and [Dark]. The copy density increases as the
level approaches [Dark], and decreases as the
level approaches [Light].
Background Suppression
The Background Suppression feature enables you to make adjustments for documents
that exhibit poor contrast between the foreground image and the background. This
feature is particularly useful for enhancing copy quality when the originals contain cut-
and-pastes, uneven density, or dark or colored backgrounds. The factory default
setting is [On].
Note: In may be necessary to rotate the image 90 degrees to obtain the correct amount of
background suppression when copying or scanning originals.
Note: The Background Suppression feature is unavailable when [Original Type] is set to either
[Photo (halftone)] or [Photo (contone)].
Procedure
Select [Off] or [On].
Off
Background suppression is disabled.
On
The system applies background suppression to
remove from the copies the background that may
be present on the original.