Filter
Top Products
Sender Settings
105
1
D Enter the PIN Code, and then press [OK].
The standby display appears.
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
E Press the {Start} key.
Note
❒ For the maximum number of digits you can use in a PIN Code, see “Max-
imum Values”.
❒ You can enter numbers, p, q, and pauses.
❒ PIN Codes are not printed in lists and reports.
❒ You can set the machine so that a PIN Code must be entered after the fax
number before you can send a fax. For details, contact your service repre-
sentative.
Reference
p.278 “Maximum Values”
“Facsimile Features”, General Settings Guide