Filter
Top Products
Transmission
68
1
D To add a destination, press [Add].
When you press [Prg. Dest.], you can register an entered destination in the des-
tination list.
E Specify the next destination.
To add another destination, repeat steps
D
and
E
.
F Press the {Start} key.
The machine starts to scan the original and stores it in memory. When scan-
ning ends, the Communicating indicator lights and transmission starts.
Note
❒ Depending on security settings, [Manual Entry] may not appear, and you
may be unable to enter the IP-Fax destination.
❒ For a list of gateways (T.38-compliant), gatekeepers, or SIP servers that are
certified as operable with this machine, contact your local reseller or ser-
vice representative.
❒ Methods of entering a destination vary depending on the network settings
made by the administrator. Ask the machine administrator for details. For
details about entering the IP-Fax destination, see “Regarding IP-Fax desti-
nations”.
❒ To avoid accidentally pressing the wrong Destination key, you can set the
machine so that each time a destination is added using a Destination key,
[
Add
]
must be pressed. Make the setting in User Parameters (switch 17, bit 2)
in the Facsimile Features menu.
❒
For the maximum number of digits for a destination, see “Maximum Values”.