Filter
Top Products
System Requirements
This section describes the prerequisites for operation of the three different product installa-
tion options:
• Functional Subsystem Spool File Converter
• idaPSS Program Exit
• Batch program
Common print resource requirements are listed in the last chapter in this section.
Functional Subsystem Spool Converter Requirements
The IDAXFC operates as a functional subsystem initiated as a started task (using a JES,
CA-Spool or start printer command).
The load library used by the program requires a minimum of 1 MB. DASD space.
The remainder of the libraries supplied with the
idaXFC
require approximately 1 MB. DASD
space.
The IDAXFC requires a minimum region size of 4MB.
The following products are prerequisites for installing of
idaXFC
.
1
• Operating System
One of the following
IBM
MVS products is required:
* OS/390
* MVS/ESA
* MVS/XA
• Spool Subsystem.
One of the following spool subsystems is required:
* JES2/JES3 Spool system
* CA-Spool Spool system
idaPSS XES Conversion Exit Requirements
The idaPSS XES Exit requires that idaPSS has already been installed on the system. Only
the OS/390 or MVS version of idaPSS may be used to install the idaPSS XES Exit.
1
For details regarding support of specific product versions, refer to related
i-data
documentation.
System Requirements 13