Filter
Top Products
•
XES014I IDA XFC RUNNING IN TEST MODE
Description The product is running in TEST MODE, where only one printer can
be defined.
Severity Information only message.
Action Operation of one ICDS printer is possible without the
idaXFC
KEY
PROFILE statement (i.e. TEST MODE). If additional printers are re-
quired to be tested, obtain a product key from the product distributor.
•
XES015I NO PRINTERS DEFINED
Description An operator operation has been attempted when no printers are de-
fined in the idaXFC profile.
Severity No action will be performed (printing is not possible).
Action Respecify the idaXFC profile to reference one or more printers.
•
XES016I IDA XFC LICENSED FOR nnnn PRINTERS
Description Operation of the product has terminated as the number of licensed
printers has been exceeded.
Severity Processing for the named subsystem is terminate.
Action A maximum of stated number of printers may be defined for print op-
eration to
all
instances of IDAXFC operational on the same system
image. Support of additional printers will require use of another prod-
uct key.
•
XES017I nnnn PRINTERS DEFINED
Description The
idaXFC
has located nnnn PRINTER definitions in the
idaXFC
PROFILE.
Severity Information only message.
Action None.
•
XES019I INVALID DECIMAL NUMBER nnnnn
Description A non-decimal numeric value has been specified in the IDAXFC pro-
file.
Severity The value specified will not be used for the named printer.
Action Correct the IDAXFC profile entry for the target printer.
•
XES020I OUT OF RANGE nnnnn
Description An IDAXFC profile value contains a value that is outside of the ac-
ceptable range.
Severity The value specified will not be used for the named printer.
Action Correct the IDAXFC profile entry for the target printer.
A-4 ida XFC Installation Guide