Filter
Top Products
•
XES061I INVALID OPERATOR COMMAND command
Description An invalid idaXFC operator command was received.
Severity The command entered is ignored.
Action Refer to the Operator Controls section in this document for a list of
valid operator commands.
•
XES062W INVALID ORDER RECEIVED IN FSS fssorder
Description The idaXFC FSI interface received the FSS order "fssorder" that is
not supported.
Severity idaXFC order is ignored. Processing continues.
Action Restart the idaXFC specifying an FSI trace option on the failing
printer and contact the product distributor.
•
XES063I keyword TOKEN TOO LONG
Description An idaXFC modify keyword exceeded 16 characters.
Severity Command token is ignored.
Action Refer to the Operator Controls section in this document for a list of
valid operator commands and reenter the command if required.
•
XES064I TOO MANY MODIFIED, REMAINDER SKIPPED
Description An excessive number of modify commands could not be accepted.
Severity The additional modify commands will not be processed.
Action Refer to the Operator Controls section in this document for a list of
valid operator commands and reenter the command if required. Up
to eight modify commands can be entered simultaneously.
•
XES066I BLANK MODIFY command
Description An idaXFC invalid modify command "command" was attempted.
Severity The operator command is ignored.
Action Refer to the
ida Print Subsystem Product Installation Guide
Operator
Controls section for a list of valid modify commands and reenter the
command if required.
•
XES067I MODIFY COMMAND COMPLETED
Description The operator entered modify command has been accepted and is in
effect for the subsequent print job(s).
Severity Information only message.
Action None.
A-8 ida XFC Installation Guide