Filter
Top Products
XEROX DOCUPRINT 180 LPS OVERVIEW
1-4 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
Options
The following options are available to further enhance the capabilities
of your Xerox DocuPrint 180 LPS.
Note: For detailed information regarding these options, please
contact your sales representative.
Floppy disk drive
The floppy disk drive is located in the system controller, to the right
of the 1/4 inch cartridge tape drive. It allows you to transfer files
between a floppy disk and the system controller’s hard disk.
Therefore, it provides an alternative way for backing up and restoring
system controller rigid disk files.
9-track magnetic tape drive
The 9-track (1600/6250) magnetic tape drive is an alternative or
additional offline capability to the 18 or 36-track cartridge tape drive
for inputting print and nonprint data to the Xerox DocuPrint 180 LPS.
(Refer to figure 3-5.)
Refer to
Xerox DocuPrint 180 LPS Operator Guide
and to the
Xerox
LPS Tape Formats Manual
for additional information
36-track cartridge tape drive
The 36-track cartridge tape drive is an alternative or additional offline
capability to the 9-track magnetic tape drive for inputting print and
nonprint data to the Xerox DocuPrint 180 LPS. It reads 18 and 36-
track and writes 36-track IBM- and ANSI-compatible half-inch tape in
the 36-track IBM 3480/3490 data format.
Refer to the
Xerox DocuPrint 180 LPS Operator Guide
and to the
Xerox LPS Tape Formats Manual
for additional information.
Feeder stacker
The DocuPrint 180 LPS has an Inverter Feeder Stacker, and up to
three optional feeder stackers.
Refer to the section “Printer components” in the “DocuPrint 180 LPS
overview” chapter for information on the feeder stackers.