Filter
Top Products
BASIC CONCEPTS
2-4 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
Output subsystem
The output subsystem provides paper stacking, report collating, and
sample print capabilities.
DocuPrint 180 LPS production process overview
The process of producing a job on an DocuPrint 180 LPS can be
broken down into three distinct phases: input, special processing,
and output. Figure
2-2, illustrates these three phases below.
Figure 2-2. Basic processing flow
A description of each phase is described in the input section that
follows.
Sources of input for the DocuPrint 180 LPS
The input phase of job production begins with the collecting and
inputting of data using one of the following sources:
Several data input methods are available, as shown in figure 2-3