Filter
Top Products
XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
3-2 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
System controller hardware components
The system controller components are the system disks, the system
controller panel, the PC user interface (PC UI), the quarter-inch
cartridge (QIC) tape drive and optional floppy disk drive. A 9-track
magnetic tape drive and a 36-track cartridge tape drive are available
as options and are housed in the peripheral cabinet.
Figure 3-2 shows the Xerox DocuPrint 180 LPS system controller
with the cartridge tape drive.
Figure 3-2. Xerox DocuPrint 180 LPS system controller
1 System user interface (PC UI)
2 Operator control panel
3 QIC tape drive
Quarter-inch cartridge tape drive The standard QIC tape drive (320 or525 MB in streaming mode;
quarter-inch ANSI) provides an alternative source for the loading and
backing up of user files (extension files such as .FRM) and fonts to
and from the system disk. Disk save and restore (DSR) and system
generation (sysgen) functions can be performed from the quarter-
inch tape drive. It is not an input source for print jobs.
Floppy disk drive The optional floppy disk drive is located in the front panel of the
system controller. It provides an alternative way of backing up and
restoring system controller rigid disk files.
System disks Three 1.2 GB (formatted) SCSI system disks are provided as a
standard feature. It resides inside the system controller and stores
the operating system, fonts, forms, and general user files for the
Xerox DocuPrint 180 LPS. Optionally, one additional system disks
(each 1.2 GB formatted) can be installed, depending on storage
needs.