Filter
Top Products
XEROX DOCUPRINT 180 LPS HARDWARE COMPONENTS
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE 3-3
System controller panel As shown in figure 3-3, the system controller is powered on or off,
booted, and switched between local and remote using the buttons on
this panel.
Figure 3-3. System controller panel
1 Power On switch
2 Power Off switch
3 Power On indicator
4 Boot switch
5 Remote switch and indicator
6 Local switch and indicator
PC UI Your Xerox DocuPrint 180 LPS has a PC UI connected to the system
controller.
The PC UI is an IBM-compatible Pentinum-based personal computer
(PC) with a 100 MB or larger hard disk, 3.5-inch floppy disk drive,
keyboard, color monitor, mouse, and a mouse pad. The PC UI allows
you to communicate with the Xerox DocuPrint 180 LPS, to start and
monitor print jobs. Tasks are performed through a dynamic set of
windows and graphic objects displayed on the PC UI screen.
Windows and options are selected with the mouse pointing device or
by pressing certain keys on the keyboard. You can also key in
commands through a command line window on the PC UI display
screen.
Figure 3-4 shows the Xerox DocuPrint 180 LPS PC UI.
Figure 3-4. PC UI