Filter
Top Products
XEROX DOCUPRINT 180 LPS OVERVIEW
1-8 XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE
Clearance requirements
Table 1-2 describes the amount of clearance required for the various
components.
Environmental requirements
Table 1-3 lists the environmental requirements.
Table 1-2. Clearance requirements
Component Clearance required
Printer 36 inches/914 mm on each side
50 inches/1270 mm at front of printer
System controller 36 inches/914 mm on each side
Finishers and bulk
feeders(attached to your
bypass transport)
36 inches/914 mm on each side
Table 1-3. DocuPrint 180 environmental requirements
Environmental requirements
Operating temperature Recommended:
Minimum:
Maximum:
72° F ± 4° F / 22° C ± 2° C
50° F / 10° C
85° F / 29° C
Humidity Minimum:
Maximum:
Recommended:
30%
65%
45% +/- 10%
Altitude Normal:
Maximum:
Up to 6,000 feet/1830 m above sea level
9,000 feet/2743 m above sea level
Heat dissipation
System controller 3,754 Btu per hour
Peripheral cabinet (fully configured) 3,195 Btu per hour
Printer Standby:
Operating:
Energy Saver:
4,454 Btu per hour
32,770 Btu per hour
2,700 Btu per hour
Audible noise Standby:
Operating:
Continuous: 52dB (A)
Impulse: N/A
Continuous: 82dB (A)
Impulse: 82dB (A)