Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 4-3
Full sysgen procedure
The following table lists the steps used to perform a full sysgen.
Table 4-2. Steps to perform a full sysgen
Step Action System response
1. Load the SST tape or cartridge tape on the
selected peripheral device.
2. Press the Boot button. The following is displayed:
READY
$
3. Key in:
BT (boot from tape),
BC (boot from 1/4-inch cartridge tape), or
BX (boot from 36-track 3490E
cartridge)
The command menu displays:
COMMANDS DISPLAY COMMANDS
BOOT Boot the operating system
SYSGEN Build or update system files on
disk from tape or host
FORMAT Format and initialize disk pack
HOSTCOPY Copy user files from host to
disk
AUTO Auto Sysgen
MINI Configuration change only
ERASE Erase all files.
4. Format the system disks by entering
FORMAT or ERASE and pressing
<ENTER>.
NOTE: System responses reflect the format
procedure. The Erase procedure mimics the
format procedure with the exceptions of
"erase" appearing in some places where
format had been displayed.
The following message displays:
Formatting/Erasing the disks will destroy the
data.
Do you still want to format/erase the
disk(s)? (y or n)
5. Enter Y to continue with the format Are you sure? [y or n]