Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
4-6 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE
*******************************************************************************
* Disk unit * 0 * 1 * 2 * 3 *
*******************************************************************************
* Drive Type * * * * *
*******************************************************************************
* Disk Status * Selected * Not present * Not Present * Not present *
*******************************************************************************
*Format * * * * *
* Elapsed * mm:ss * * * *
* Time * * * * *
******************************************************************************
* Total * * * * *
* Usable * * * * *
* Sectors * * * * *
*******************************************************************************
When formatting is completed the following is displayed:
Format/Erase program completed.
System does not have an ID record
Enter system id of up to 30 characters
....*....*....*....*....*....*
>
10. Enter the system ID record of up to 30
characters and press <ENTER>.
System ID IS: xxxxx (the ID record that
you just entered.)
Do you want to enter a new system id?
’y’ or ’n’
11. Enter N and <ENTER>. Initializing disk drive 0
Creating file BITMAP .$Y$ on drive 0
Creating file MSBLK .$Y$ on drive 0
Creating file BADBLK .$Y$ on drive 0
Creating file CDLYL .$Y$ on drive 0
ENTER CMD (’C’ FOR MENU)>
12. Key in SYSGEN and press <ENTER>. * Sysgen program running *
System ID is: xxxxx
Do you want to enter a new system id?
'y' or 'n'
13. Enter N and <ENTER> to allow the sysgen
to continue. Go to step 15.
Table 4-2. Steps to perform a full sysgen (continued)
Step Action System response