Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
4-20 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE
10. Request the host operator to vary the
printing system offline, then enter C. (You
need not press <ENTER>.)
When the sysgen completes processing, the following is
displayed
* Sysgen process successful *
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
11. Press the Boot button. The following is displayed:
READY
$
12. Enter BD and press <ENTER>. This loads the new sysgen processor, that you just
retrieved from the host, into main memory from the system
disks.
The command menu displays:
COMMANDS Display commands
BOOT Boot the operating system
SYSGEN Build or update system files on
disk from tape or host
FORMAT Format and initialize disk pack
HOSTCOPY Copy user files from host to disk
AUTO Auto Sysgen
MINI Configuration change only
ERASE Erase all files
13. Enter SYSGEN and press <ENTER>. This starts the sysgen procedure from the new sysgen
processor.
* Sysgen program running
* System ID is: xxxxx
Do you want to enter a new system id? ’y’ or ’n’
14. Enter N to retain the existing ID or Y to
enter a new system ID and press
<ENTER>.
Do you want to save the accounting file?
enter ’y’ or n’
15. Enter Y or N and press <ENTER>. The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter ’y’
or ’n’>
16. Enter Y or N and <ENTER>. A Y and <ENTER> response causes the change menu to
display. Each time a change is made, the change question
is asked until an N and <ENTER> is entered, and the
sysgen program continues with the following.
Do you want to discard the changes you just
made? Enter ’y’ or ’n’>
Table 4-5. Steps to perform an online update sysgen
Step Action System Response