Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 4-21
17. To discard the changes you just made and
continue sysgen, enter Y.
To save the changes you just made
and continue sysgen, enter N.
Enter Y and <ENTER>.
Is continuation of sysgen required? (y or n)
Should sysgen read from host or tape? ’h’ or
’t’
>
18. For an online sysgen, enter H (host) and
press <ENTER>.
Waiting to read files from host.
19. Request the host operator to vary the
printing system online.
NOTE: The host job is identical to the one
used in step 10, except that it spaces one
file farther down the SST.
You can then submit a job from the host to transmit the last
SST file to the printing system. This file contains a
concatenation of all system files on the SST. The new
sysgen processor uses these files to build a new operating
system on the LPS system disks.
System files are listed as they are read in from the host onto
the system disks.
End of tape found. Is another tape to be
sent? y or n
20. Enter Y or N depending on whether
additional data is to be transmitted.
When N is selected the following is displayed.
Vary offline at host. Then enter ’C’
21. Request the host operator to vary the
printing system offline, then enter C and
press <ENTER>.
The sysgen finishes processing and the
* Sysgen process successful *
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
22. Key in B (boot) and press <ENTER>. The OSS loads onto the system disk.
Loading program . . .
Time prompt appears.
23. Enter the date and time. Entry of the mm/
dd/yy seconds (ss) is optional.
Enter Y or N to indicate whether time and
date are correct.
The time window displays
hh:mm:ss
ARE THE DATE AND TIME CORRECT AS DISPLAYED
(Y/N)?
Table 4-5. Steps to perform an online update sysgen
Step Action System Response