Xerox DocuPrint 96 Printer User Manual


 
SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 4-7
14. Enter Y and <ENTER> to allow the
previously entered ID to be changed.
Key in the new ID and press <ENTER>.
NOTE: When you enter N, sysgen will
continue. If you enter Y, you will be able to
change the system ID again.
Enter system ID of up to 30 characters
....*....*....*....*....*....*
>
* System ID IS: xxxxx
Do you want to enter a new system id?
’y or ’n’
15. If configured, enter the Ethernet address
provided by Xerox and press <ENTER>.
Enter Ethernet Network Address
>
16. Enter Y or N and <ENTER>. A Y and
<ENTER> response causes the change
menu to display. Each time a change is
made, the change question is asked until an
N and <ENTER> is entered, and the sysgen
program continues.
The base configuration and the system configuration options
are displayed followed by:
Do you wish to make any changes? Enter ’y’ or
’n’
17. To discard the changes you just made and
continue sysgen, enter Y.
To save the changes you just made and
continue sysgen, enter N.
Do you want to discard the changes you just
made? Enter ’y’ or ’n
>
18 Enter ’h’ (for host/online sysgen) or ’t’ (for
offline sysgen) and press <ENTER>.
NOTE: The system response is for offline
sysgen. For online sysgen refer to step 9 of
the Online Update
Creating file DISPCF.SYS on drive 0.
Should sysgen read from host or tape? ’h’ or
't’
Reading files from tape/host is displayed.
Each file is read from the online channel or tape and placed
on the disk.
Creating file xxxxxx.yyy on drive n
xxxxxx is the system file name,
yyy is the system file type, and
n is the drive number that the file is
stored onto.
When sysgen completes, the following message displays:
* Tape rewinding * Sysgen process successful
*
* Sysgen program off *
Enter Cmd ['C' for Menu]>
19. Key in B (boot) and press <ENTER>. The OSS loads onto the system disk.
Loading program . .
Time prompt appears.
Table 4-2. Steps to perform a full sysgen (continued)
Step Action System response