Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
4-16 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE
13. The system displays:
**Applying sysgen patches**
The following patches may be selected by
PATCH-ID:
PATCH-ID INVOKES
-------- -------
MER001 Patch to allow Mergenthaler fonts
only.
Enter patch ID’s or press ENTER:
14. Enter the patch ID’s that are needed for the
system and press <ENTER>, OR just press
<ENTER>.
***RESUMING SYSGEN PATCHES****
** Sysgen patches completed**
** Deleting sysgen patches**
* ! Crash/Reboot will occur in 15 seconds ! *
The system reboots and displays:
; WOULD YOU LIKE TO COMPILE THE .IMP FILES
AT THIS TIME? (Y/N)
15. Enter Y and press <ENTER>. IFU IPFNTS IPFNTS
Lists all font families as they are compiled, in the following
format.
IF1100 Font family "(specific font family)"
Upon completion of compilation, the system automatically
goes to logon class 1 and displays:
Class 1 selected
OS1000 Ready For Commands hh:mm:ss
16. Apply any incremental patches. Refer to the “Steps for loading incremental patches” section at the end of
this chapter.
This completes update sysgen using the sysgen command.
Table 4-4. Steps to perform an offline update sysgen using
the SYSGEN command (continued)
Step Action System response