Filter
Top Products
SAMPLE SYSTEM CONFIGURATIONS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 3-7
Additional sysgen parameters
In addition to the configuration options listed previously, you may
also need to supply the following information during the system
generation process.
Table 3-5. Sysgen parameters
Command Description
Type of sysgen Sysgen, auto sysgen, or mini sysgen can be performed by
selecting appropriate commands from the Sysgen Command
menu (table 2-1)
System ID Each system can be assigned a name of up to 30 alphanumeric
characters, including spaces.
The ID displays in the following situations:
• Whenever the system is booted
• When a rollover and recovery occurs
• In a rollover dump
• Whenever a sysgen is performed
• On listings produced by the Editor
• On listings produced by the REPORT command to report
billing information.
Accounting file You are asked if you want to save user accounting information.
Remember that if a currently existing accounting file is not
saved, you lose not only the accounting data but also the
hierarchical data used to structure the file.
Report accounting You are asked if you want report accounting. This results in run
statistics being recorded for each report, as opposed to each
job (which may contain several reports).
Setting default values After the sysgen completes, you may want to adjust the
following parameters to which the sysgen automatically
assigns default values:
• Maximum fonts per job (default 32)
• Maximum forms per job (default 12)
• Maximum graphics per job (default 32)
• Print file size (default of 425 cylinders is not determined
by a sysgen).
Refer to the
Xerox DocuPrint 96/DocuPrint 96MX LPS
Operations Reference
for information on modifying these
values.