Filter
Top Products
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 2-1
2. 2Sysgen commands
This chapter explains the commands used for performing sysgens.
Sysgen Command menu
The Sysgen Command menu, illustrated in table 2-1, appears on the
printing system display screen when you boot the sysgen processor.
It also appears when COMMANDS is entered following the sysgen
prompt character.
Note: The command HOSTCOPY options appears in your Sysgen
Command menu only if your system has online capability.
The interactive dialogue for a particular procedure may vary slightly
depending upon the release medium (tape or cartridge), input
method (online or offline), and product configuration.
Command functions
The commands in Table 2-1 may appear in the Sysgen Command
menu, depending upon the hardware options present on your
system. Command abbreviations are underlined.
Table 2-1. Sysgen Command menu
**** SYSGEN PROCESSOR, VERSION V3B ****
COMMAND
COMMANDS Display commands
BOOT Boot the operating system
SYSGEN Build or update system files
on disk from tape or host
FORMAT Clear and format disk pack
HOSTCOPY Copy user files from host to
disk
AUTO Auto sysgen
MINI Configuration change only
ERASE Erase all files
Enter Cmd (’C’ for Menu)>