Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 4-11
Steps to perform an offline update sysgen using the AUTO command
The following table lists the steps used to perform an offline update
sysgen using the AUTO command.
Table 4-3. Steps to perform an offline update sysgen using
the AUTO command
Step Action System response
1. Load the SST tape or cartridge tape on the
selected peripheral device.
Verify the existence of sufficient disk space,
using the FCHECK command. Each disk
must have a minimum of 3000 contiguous
sectors free. If the number of available
sectors is below 3000:
• Back up as many files as necessary to
obtain the minimum number of free
sectors.
• Delete the saved files from disk.
• Compress the disk.
2. Press the Boot button. The following is displayed:
Ready
$
3. Key in:
BT (boot from tape)
BC (boot from 1/4-inch cartridge tape), or
BX (boot from 36-track 3490E cartridge)
The command menu displays:
COMMANDS Display commands
BOOT Boot the operating system
SYSGEN Build or update system files on
disk from tape or host
FORMAT Format and initialize disk pack
HOSTCOPY Copy user files from host to disk
AUTO Auto Sysgen
MINI Configuration change only
ERASE Erase all files
4. Key in AUTO and press <ENTER>. * Sysgen program running *
System ID is: xxxxx
Do you wish to continue auto sysgen: ’y’ or
’n’