Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE 4-15
7. Enter Y or N and press <ENTER>. Do you want to save the accounting file?
enter ’y’ or ’n’
8. Enter Y or N and <ENTER>. A Y and
<ENTER> response causes the change
menu to display. Each time a change is
made, the change question is asked until an
N and <ENTER> is entered, and the sysgen
program continues.
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter ’y’
or ’n’
>
9. To discard the changes you just made and
continue sysgen, enter Y.
To save the changes you just made and
continue sysgen, enter N.
Enter Y and <ENTER>.
Do you want to discard the changes you just
made? Enter ’y’ or ’n’>
Is continuation of sysgen required: (y or n)
Should sysgen read from host or tape? ’h’ or
’t’
10. Enter ’t’ and press <ENTER>. Reading files from tape/host is displayed.
Each file is read from the online channel or tape and placed
on the disk.
Creating file xxxxxx.yyy on drive n
xxxxxx is the system file name,
yyy is the system file type, and
n is the drive ID number that the file is
stored onto.
When sysgen completes, the following message displays:
* Tape rewinding * Sysgen process
successful *
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
11. Key in B (boot) and press <ENTER>. The
OSS loads onto the system disk.
Loading program . . .
Time prompt appears.
12. Enter the date and time. Entry of the
seconds (ss) is optional.
Enter Y or N to indicate whether time and
date are correct.
The time window displays.
mm/dd/yy hh:mm:ss
ARE THE DATE AND TIME CORRECT AS DISPLAYED
(Y/N)?
Table 4-4. Steps to perform an offline update sysgen using
the SYSGEN command (continued)
Step Action System response