Filter
Top Products
SYSGEN AND SYSGEN-RELATED PROCEDURES
4-12 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS SYSTEM GENERATION GUIDE
5. Key in Y and press <ENTER>. This will be an auto sysgen
Reading files from tape/host is displayed.
Each file is read from tape and placed on the disk.
Creating file xxxxxx.yyy on drive d
xxxxxx is the system file name,
yyy is the system file type, and
d is the drive number that the file is
stored onto.
When sysgen completes, the following message displays:
* Tape rewinding *Sysgen process successful*
* Sysgen program off *
Enter Cmd [’C’ for Menu]>
6. Key in B (boot) and press <ENTER>. The OSS loads onto the system disk.
Loading program . . .
Time prompt appears.
7. Enter the date and time. Entry of the seconds
(ss) is optional.
Enter Y or N to indicate whether time and
date are correct.
The time window displays
mm/dd/yy hh:mm:ss
ARE THE DATE AND TIME CORRECT AS DISPLAYED
(Y/N)?
8. The system displays:
**Applying sysgen patches**
The following patches may be selected by
PATCH-ID:
PATCH-ID INVOKES
------- -------
MER001 Patch to allow Mergenthaler fonts
only.
Enter patch ID's or press ENTER:
9. Enter the patch ID’s that are needed for the
system and press <ENTER>, OR just press
<ENTER>.
***RESUMING SYSTGEN PATCHES***
** Sysgen patches completed**
** Deleting sysgen patches**
* ! Crash/Reboot will occur in 15 seconds ! *
The system reboots and displays:
; WOULD YOU LIKE TO COMPILE THE .IMP FILES
AT THIS TIME? (Y/N)
Table 4-3. Steps to perform an offline update sysgen using
the AUTO command (continued)
Step Action System response