Filter
Top Products
Page 10-2 Xerox WorkCentre M15/M15i User Guide
Maintenance
Cleaning
Cleaning the Document Glass and Cover
Keeping the Document Glass clean helps ensure the best possible copies. It is recommended
that the Document Glass is cleaned at the start of each day and during the day as needed.
The Constant Velocity Transport (CVT) glass is the strip of glass located to the left of the
Document Glass and is used to scan originals fed through the Automatic Document Feeder
(ADF). The CVT glass also requires cleaning.
CAUTION: DO NOT use organic or strong chemical solvents or aerosol cleaners or
pour fluids directly onto any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of
children.
WARNING: DO NOT remove the covers or guards that are fastened with screws or
attempt any maintenance procedure that is not specifically described in this
documentation.
Ø Slightly dampen a soft lint-free
cloth or paper towel with water.
Ø Open the ADF or document
cover.
Ø Wipe the surface of the
Document Glass and CVT glass
until they are clean and dry.
Ø Wipe the underside of the white
document cover until it is clean
and dry.
Ø Close the ADF or document
cover.