Filter
Top Products
Xerox WorkCentre M15/M15i User Guide Page 6-9
Fax (M15i Only)
Priority Send
l Use to transmit
high priority
documents
ahead of
reserved
operations.
Ø
Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key
until ’FAX MODE’ displays and press [Enter].
Ø Program the features required for the job.
Ø Press [Menu/Exit] and press or until ’PRIORITY SEND’ displays, then press
[Enter].
Ø Enter the number of the remote machine using the Numeric Keypad or the Speed Dial
function.
Ø Press [Enter] to confirm the number.
Ø If a name is required, enter a name for the job using the Numeric Keypad and press [Enter].
The originals are scanned into memory before transmission. The display shows the
memory % available and the number of pages scanned.
The document will be transmitted when the current operation is concluded. If a broadcast
operation is in progress, the Priority Send will be sent between transmissions or redial
attempts.
TX Poll
l Use to allow
another fax
machine to
retrieve
documents from
the WorkCentre
M15i.
Ø
Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key
until ’FAX MODE’ displays and press [Enter].
Ø Program the features required for the job.
Ø Press [Menu/Exit] and press or until ’POLLING’ displays, then press [Enter].
Ø Press or until ’TX POLL’ displays, then press [Enter].
The display requests a 4 digit poll code. The poll code is preset to 0000 at the factory, which
represents no poll code. If a poll code is entered, the person retrieving the documents will
need to enter the same poll code at the remote machine to gain access to the stored
documents at the WorkCentre M15i.
Ø To use a poll code enter a 4 digit code, then press [Enter].
Ø If a poll code is not required, ensure the display shows 0000 and press [Enter].
If access to the document is required by more than one remote machine, it can be stored in
the Bulletin Board memory. This allows the document to be retrieved more than once
without being deleted. If it is not stored in the Bulletin Board memory, it will be erased
automatically after being retrieved by one machine.
Ø Using the or key, select ’ON’ to store the document in the Bulletin Board memory
or ’OFF’ to store the document in standard memory.
Ø Press [Enter].The originals are scanned and stored in memory ready for polling. The
display shows the memory % available and the number of pages stored.