Filter
Top Products
Page 6-8 Xerox WorkCentre M15/M15i User Guide
Fax (M15i Only)
Advanced Fax Features
There are a number of advanced Fax features available on the WorkCentre M15i. The table
below identifies the advanced features available, the options for each feature and how to
select the feature.
Feature Description
FEATURE TO SELECT....
Delay Send
l Use to send a
fax at a
specified time.
Ø
Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key
until ’FAX MODE’ displays and press [Enter].
Ø Program the features required for the job.
Ø Press [Menu/Exit] and press or until ’DELAY SEND’ displays, then press [Enter].
Ø Enter the number of the remote machine using the Numeric Keypad or the Speed Dial
function.
Ø Press [Enter] to confirm the number.
Ø To send the fax to more than one location use the or navigation keys to select [1:
YES] and press [Enter]. Enter the next fax number and press [Enter]. Continue entering fax
numbers until all the destinations have been entered.
Ø To send to a single location or when the last destination has been entered select [2: NO]
and press [Enter].
The display requests a name for the Delay Send.
Ø If a name is required, enter a name using the Numeric Keypad and press [Enter].
The display shows the current time and requests a start time for the fax.
Ø Enter the time using the Numeric Keypad.
Ø If available, select AM or PM for 12-hour format using the or keys. Press [Enter] to
confirm the start time.
The originals are scanned into memory and stored ready for transmission at the specified
time. The display shows the memory % available and the number of pages scanned.