Filter
Top Products
Page 6-16 Xerox WorkCentre M15/M15i User Guide
Fax (M15i Only)
Group Dialing
l Use to assign multiple
Speed Dial numbers to a
single Group number for
broadcast transmissions.
Assigning
numbers
to a Group
Use to setup a
Group using
multiple Speed
Dial numbers.
Ø Ensure the LCD displays FAX. If not, press the
[Copy/Fax/Scan] key until ’FAX MODE’ displays and
press [Enter].
Ø Press [Menu/Exit]. ’SYSTEM DATA’ displays.
Ø Press or until ’GROUP DIAL’ displays, then
press [Enter].
Ø Press [Enter] to select ’NEW’.
Ø Enter a Group number from Speed Dial locations 1 -
80 and press [Enter].
If the Group Dial number is already used, ’NO. IS
REGISTERED displays and another number must
be entered.
Ø The display requests a Speed Dial number. Enter the
Speed Dial number to be included in the Group Dial
and press [Enter].
The Speed Dial number, fax number and name
displays.
Ø Press [Enter].
Ø Repeat the procedure to enter all the Speed Dial
numbers required for inclusion in the Group.
Ø Press [Menu/Exit] when all the numbers have been
entered.
Ø The displays requests an ID for the Group Dial. If
required, enter a name for the Group and press
[Enter].
Ø If a name is not required, press [Enter].
Ø To setup another Group Dial, repeat the procedure.
To exit press [Menu/Exit].