Filter
Top Products
r Command - Set Double Buffer Mode
Description: Use this command to disable or reenable the
double buffer image (label) printing. The dou
-
ble buffer feature is a automatically tested and
set by the q and Q commands.
Syntax: rp
1
Parameters: p
1
= N - Disable Double Buffer Mode
Y - Re-enable the Double Buffer Mode if
the printer memory supports the image
buffer size set by Q and q parameters
The rN command must follow the q and Q com
-
mands in a form (label) program.
Verify the image buffer status with the U com-
mand(s). See page 2-2, for a sample of the Dump
Mode Printout.
3-84
980352-001 Rev.A