Filter
Top Products
oE Command - Line Mode Font Substitution
Description: This command is a Page Mode (EPL2) com
-
mand that allows the printer to set alternate
Line Mode font character sets. The fonts are
activated by the oE command and are intended
for EPL1 emulation.
Syntax: oEp
1
,p
2
,p
3
,p
4
,p
5
p
1
= 5 x 7 bitmap font - Normal (CCSET4)
Line Mode EPL1 Compatibility Font A0
Total character area is 8 x 11 dots
p
2
= 5 x 7 bitmap font - Bold (CCSET4)
Line Mode EPL1 Compatibility Font A0
Total character area is 8 x 11 dots
p
3
= 5 x 7 bitmap font - Doubled (CCSET4)
Line Mode EPL1 Compatibility Font A0
Total character size is 8 x 11 dots
p
4
= 14 x 22 bitmap font - (CCSET1)
Line Mode EPL1 Compatability Font A
Total character area is 16 x 26 dots
p
5
= 10 x 18 bitmap font - (CCSET3)
Line Mode EPL1 Compatability Font A
Total character area is 12 x 22 dots
❏
Parameters p
1
-p
5
are preloaded soft fonts.
❏
Parameters p
1
-p
5
must be all belower case
alpha soft fonts. See the ES command on
page 3-35 for more details on soft fonts.
❏
The EPL2 font sets2&4canberestored as
the default Line Mode fonts by sending the o
command without a parameter.
980352-001 Rev.A
3-65