Filter
Top Products
GG Command - Print Graphics
Description Use this command to print a PCX (format)
graphic that has been previously stored in
printer memory.
Syntax GGp
1
,p
2
,{"NAME" | Variable Data}
Parameters p
1
= Horizontal start position (X) in dots.
p
2
= Vertical start position (Y) in dots.
“NAME” or Variable Data = This is the
graphic name used when the graphic
was stored. This name can be supplied
via variable data (V00 - V99).
·
The name may be up to 8 characters long.
·
Graphic names stored by the printer are case
sensitive and will be stored exactly as entered
with the GM command line; i.e.
“GRAPHIC1”, “graphic1” and
“graPHic1” are three different graphics
when stored into the printer or when retrieved
by the user.
Example: GG50,50,"LOGO1"↵
FK"TESTFORM"¿ :delete form “TESTFORM”
FS"TESTFORM"¿ :begins the form store sequence of
:the form “TESTFORM”
V00,8,N,"Enter Graphic Name:"¿
GG50,50,V00¿
FE¿ :ends form store sequence
FR"TESTFORM" :retrieves the form named TESTFORM
?¿ :Download variables
LOGO1 :Graphic name to be recalled and
:printed
P1¿ :Print one label with graphic LOGO1
980352-001 Rev.A
3-47