Filter
Top Products
UQ Command - Configuration Inquiry
Description Use this command to send the printer configu
-
ration information back to the host via the serial
port.
Syntax UQ
The printer will send the printer configuration,
line by line, in ASCII to the host through the
RS-232 port. The information matches the con
-
figuration information printed in final phase of
the printer’s AutoSense routine, the Dump
Mode Printout or the U command printout.
The information and number of lines of data
sent by the printer will vary from printer to
printer depending upon the type of printer and
options installed.
Example:
UQ¿
3-100
980352-001 Rev.A